Make a decorative partition between different zones in the apartment can be its own, without resorting to the services of designers and spending heavily.
You will need to buy strips of wood (orstrips of another material, veneered), a pair of metal struts and strong skein thick rope. Instead of one of the slats can be inserted "slate" - it is modern and convenient, for example, in the kitchen can be recorded on a blackboard "job" himself or home.
Create a decorative partition with his hands is easy. Of course, you have to work hard, but it will be a real decoration of your interior, giving it a unique look.
This option will fit almost any style solution, if you follow the simple rules:
- Color boards veneer must be chosen according to the color of wooden furniture and other interior wooden elements. It can be either a tone or contrast.
- Add bright accents can be by painting rope to appropriate to the overall color scheme of the interior with the help of fabric dyes.
To make a decorative partition your hands, you will need:
- two racks of IKEA (STOLMEN system, height from 210 to 330 cm vraspor placed between the ceiling and the floor);
- six wooden or laminated strips (you can use the parquet boards);
- coil of rope or rope suitable thickness;
- special paint "slate" and the ground beneath it (if you plan to write on one of the boards);
- construction glue or glue gun;
- scissors, tape measure, pencil.
Make a decorative partition easily, following a sequence of actions.
- In the right place vraspor secure racks, the distance should not exceed 80 cm between them.
- Depart from the floor about two feet, attach the adhesive on the front end of the rope and make a tight winding - about 10 rpm. The rope cut and seal the end.
- Measure the distance from the floor to the bottom and upthe upper edge of the wound - the same it must be on a different rack. Record these values - when you make a decorative partition wall with their hands, they need to be.
- Unwind the rope and use it as a template to cut 13 more of the same pieces. Of these, the support elements would be made and the guides.
- Again, measure from the floor is already known to you the distance to the lower edge of the winding wound on the two identical pieces of rope racks, fixing each turn of glue.
- Lean the first board to the rope supports,Take the rope wrap around the rack, and fasten with overlap on the other hand. Cut 12 pieces of the same rope for attaching the boards and fasten the first board to the second pillar.
- Repeat until you attach all the strips. Above the upper strap wrap ten turns of rope - here it will serve as a height limiter.
So, make a decorative partition is easy, you only need to comply with the technology.
Much more difficult to choose the right color and materialboards (this can be cork strips or plates made of plastic), the most suitable for your interior. If you need a higher or lower partition - change the number of boards that will be used.