All of us from time to time want to do somethinghis hands to create beauty and to share this achievement with the world. Making crafts from natural materials can be attributed precisely to this category of hobbies. Working with natural material, not only soothes, helps to distract from the everyday hustle and bustle, but it may well be a profitable business.
It is useful to read: Summer crafts from natural materials
Production of a variety of crafts from naturalmaterial - an excellent hobby, not only for adults but also for kids who will get the process a lot of positive emotions. Beautiful hack will be an excellent gift or a good addition to the interior, because the hand-made products are valued much more expensive than the same type of things from the store.
Crafts made from natural materials with their hands: master classes
In order to learn something completelynot necessarily to go to courses or self-study tutorials. It is enough to visit the workshops of experts or watch training videos where you can learn all the nuances of working with natural materials. Masters not only take a tour in the production of specificity, but also talk about what materials and tools will be needed in the process. Almost on every issue that may cause a beginner doubt, there is a separate workshop. Here you can see not only the specifics of the manufacture of handicrafts, but also learn the secrets of the professionals.
Crafts from wood
Wood - a beautiful and pliable material, which can learn to work either. Start best with small things: frames for photos. caskets etc. However, a novice can face the fact that it will be necessary to purchase special tools. The specifics of the equipment depends on what you are going to create.
To create a wooden box, we need to do first blank template. A stencil can be of any shape and size. To do this, draw a diagram, where specify the parameters of each part of the future crafts. To the space between the lid and the sidewalls were smooth, it is better to glue pieces of a whole, and then precisely separated from the upper part of the bottom.
For work, we need such instruments, as:
- Clamp for sizing boards;
- brush for applying the adhesive.
It is best to use soft wood - pine. alder or lime. On the wood should not be cracks, chips and knots. When assembling the boxes better to take a carpenter's glue, ideal for working with wood.
- We transfer Drawing on the boards. To do this it is best to use a ruler and a pencil.
- Once you can safely cut out parts jigsaw. The walls of the future box must be the same thickness (about 1 cm).
- must sanded all the details of sandpaper, followed by fitting joints.
- Now you can safely proceed to bonding parts. Here we use a clamp, so as better to fasten the adhesive parts boxes.
- Get the details bond joiner's glue, is clamped in the clamp until dry.
- After drying, you can attach the cover and the main part of the box with beautiful loops, which are sold in specialty stores.
- At the request of the box can be varnished or decorate furniture (legs, corners, handles).
Because natural stone is possible to make a lot of interesting things: a beautiful decoration to the original mat. It all depends on what kind of stone you want to use in the work.
To create a beautiful rug in the bathroom You can use ordinary pebbles. As a basis we take the rubber mat for the bathroom right diameter.
- Take a few kilos of pebbles. It is better to take just 5-6 kilograms.
- For gluing use universal adhesive polymerWhich can be purchased at any hardware store. Also, we need yacht varnish.
- Choose a picture and turn over mat. We transfer drawing on the surface of the mat. For this purpose we use a marker.
- Wets his hands in the water and on the resulting figure decompose stones in the correct order to form a desired pattern. Then one glue stones to the mat.
- Blotted gently brush the joints, that there was no voids.
- From Scotch do "formwork". We cover the mat lacquer several times. Give the product to dry on the reverse side.
That's all! A beautiful carpet of pebbles ready!
Applications from the leaves and flowers
Bright, colorful leaves and flowers make us happyeach season, however, they are able to give positive emotions all year around. From the leaves and flowers can make beautiful baths, worthy of decorating boxes, create a colorful pattern on the table or hold personal design experiment. Of the flowers and leaves are integers pictures and panelWho then take their place of honor in your home. For used dry leaves, grass and flowers.
The surface of the material must be perfectly flat, so dry leaves or flowers are laid between the dense pages of the books for a few weeks. After drying, you can get to work. For bonding applications to the surface of the paper used PVA glue, Any special tools are often not needed.
- Initially, the thick sheet of paper decompose the leaves and flowers in the correct order to form a pattern.
- If necessary, prune deciduous or floral material to create a symmetrical shape.
- We fix the resulting adhesive result.
The decor of shells with their own hands
Beautiful seashells from the beach may well beinteresting element in the interior decoration of your home. This hack does not only bring the originality of the situation in the room, but also to remind of fabulous days relaxing on the banks of the river or the sea. You will need glue and the finished product, which we will decorate the shells. This can be a regular Frame. picture frame. lamp and much more.
In operation, may be used shells of different sizes. Big shell in minutes turn into an unusual vase. stand under the soap or vase for decoration. Shell appropriate size ideal for the role of the lampshade, small shells can be used as candleholders. It is enough to show imagination and ordinary things become true works of art.
For many masters recommend to use liquid NailsWhich firmly hold the parts and dry quickly. You can use a normal-purpose adhesive.
Take the blank and glue in the correct order on its surface shell.
Crafts from feathers
Feathers - a rather unusual material to work withwhich usually does not need any additional equipment. However, the product may simply crumble if not firmly secure the base of the pen and to fix it in one position.
To create beautiful Christmas trees feathered we need:
- white paint;
- cardboard paper;
- feathers of any color;
- small beads.
To work is to buy several setsfeathers. The sets are sold with special feathers bend, which we need, and of a certain size. You can take the feathers of different colors, or make one-color Christmas tree.
- Make a cardboard cone - A form of future crafts.
- glue feathers to the cone starting from the bottom. You can use a hot glue gun or PVA. The adhesive is applied with a brush at the base of each feather and glued to the cardboard blank.
- After completion of the work can be for beauty glued to each pen bead.
Crafts made from natural materials with their own hands: video