designer lamps

Do it again, or how to revive the old lamp

Vintage lamp after repair

It happens that you find in the market or in the shop the wonderful lamp, but, alas, does not perform its basic function. What to do, because the lamp loved it? The answer is simple - it revives.

In our homes, that just did not find. For example, the old non-working lamp, its breathtaking views. You can certainly buy a new one, but if you want it so, then the best way out - to carry out repairs.

It will cost a symbolic price, even when replacing cables and other equipment necessary to enable the lamp. So, the readers offer step by step instructions dismantling the lamp.

Fancy requiring repair lamp, perfectly poured into the design of our living room. It was here that she, in fact, be. Nice shape with a black base and the surrounding décor.

The process of repairing an old lamp

The upper part of the lamp is removed, replace the wiring harness and mounting bracket. There is also a discreet place to finish obliterated.

Wonderful process of repairing an old lamp

Metal Bracket was badly bent.

The unique process of repairing an old lamp

Removing the bracket. To remove the old bracket, unscrew the locknut. There handy pliers.

The amazing process of repairing an old lamp

Lock nut unscrew freely, but the lamp wiring is so densely lay that seemed tied in a knot inside.

Magnificent process of repairing an old lamp

There was no need to replace the existing wire, but since the inside of the tube was taut thread, had to cut the cord to remove the metal bracket.

Bright process of repairing an old lamp

Replacement of the wire. After removal of the old wiring make replacement a new one.

Wonderful process of repairing an old lamp

Using adhesive tape and the copper wire was removed the power cord from the top of the column.

Exclusive process of repairing an old lamp

Before installing a new bracket replaced with a black collar.

Brave process of repairing an old lamp

Screw nut down until it stops, ensuring thereby a tight finding bracket.

Wonderful process of repairing an old lamp

Preparing contacts. Divide the wire about 3 cm from the edge, following the instructions in the kit.

The unusual process of repairing an old lamp

Use a Phillips screwdriver to tighten the screw to bring the connector into place.

The dizzying process of repairing an old lamp

Remove the cover from the wire and make a small cut at the end.

Stylish process of repairing an old lamp

Make underwriter's knot on both sides wire. Wrap the end of the copper wires extending around the screw and tighten it with a screwdriver. Follow the instructions very carefully here.

The modern process of repairing an old lamp
The process of repairing an old lamp

The final details. Camouflage blind spot using a black felt-tip pen.

Repairing old lamps

Instead of coloring the entire framework, it is better to hide under the stain resistant color pen, using the technique of the point of application. Shaded spot will no longer attract attention to this place.

Reconstruction of old lamps

After masking attach a new lampshade.

Ready option bottle lamp

White pleated lampshade become the perfect complement to a simple black tube.

Wonderful Lamp renovated

New lamp adds the necessary light and, as a piece of furniture looks great.

About the author

admin